This listing provides four different side seal profiles for frameless shower doors using 8-10mm glass. Each profile has a distinct cross-section designed for different gap widths and contact angles, so you can find the right match for your specific enclosure.
Four Profiles Explained
The Tetra, Hydra, Locke, and Flap profiles each address a different sealing scenario. Some have narrow fins for tight gaps, others have wider fins for broader gaps, and some feature angled or shaped fins for non-standard junctions. Select based on the cross-section of your current seal, or by measuring the gap width and consulting the profile images.
8-10mm Glass Compatibility
These seals grip glass in the 8-10mm thickness range. The channel that slides onto the glass edge is designed to accommodate this range without being too loose on 8mm or too tight on 10mm. Confirm your glass thickness before ordering.
2.1 Metre Lengths
Each profile is supplied at 2.1 metres, providing enough length for a full-height side seal with a small trimming allowance. Cut to your exact glass height during installation.
Identifying Your Profile
If replacing an existing seal, peel off a short section and examine the cross-section shape. Compare it to the four profile options. If you cannot identify the correct profile, contact Shower Solutions with a photo for assistance.
